DN80-DN100 Steam Separator Manual Drain Filtration - Separates Gas and Liquid by Inertia

Due to fluctuations in raw material prices, the model prices may vary. For specific quotations, please contact our sales staff. Thank you.

The YJQS-A steam separator delivers stable output with no flashy design, relying solely on inertia and gravity to effectively trap moisture while allowing clean air to proceed. It features a sturdy baffle plate and a single connection interface. Detailed explanation of the principle and structure of the baffle-type steam separator: The steam separator is designed to separate liquid droplets from the gas, collecting them at the bottom for discharge through the drain port, allowing dry gas to exit through the outlet.

The spherical steam separator primarily operates on the principle of cyclone separation. When steam enters the swirl tube through the inlet pipe, the airflow transitions from linear to circular motion. The majority of the rotating airflow spirals downward along the cylinder wall toward the cone, known as the outer vortex.

Design pressure: 1.0Mpa (can be customized according to user requirements)     

Pressure loss: ≤0.002 Mpa       

Separation efficiency: 99%       

Connection size: DN15～350       

Connection type: Flange PN1.0, PN1.6, PN2.5, etc. (can be customized according to user requirements)

Working principle of the YJQS steam separator in compressed air pipelines:

The main air supply pipeline should be equipped with a water collector and drain. At the connection point between the supply pipeline and the self-rescue device, a switch and a steam separator must be installed. All valves of the compressed air self-rescue system should be fully installed, with valve handles oriented in the same direction to ensure normal system operation.

The baffle-type cyclone structure is clear and intuitive. From the severe cold of the north to the humid heat of the south—the steam separator adapts to various environments.